|
Full List of
Publications |
2022
W. Luo, Y.
Wang, L. Luo, S. Gong, M. Wei, Y. Li, X. Gan, Y.
Zhao, Z. Zhu and Z. Li, ‘Single-atom
and bimetallic nanoalloy supported on nanotubes as a bifunctional electrocatalyst for
ultrahigh-current-density overall water splitting’, ACS Catalysis, 12(2022), 1167−1179. (Supplementary
Materials)
X. Zhang, Z.
Xiao, Z. Xia, S. Han, X. Meng, Y. Zhao, Z. Li and Q.
Lei, ‘Microstructure and properties
of Cu-TiNi composites prepared by vacuum hot pressing’,
Journal of Alloys and Compounds, 897(2022)
162729.
2021
H. Li, Y. Gao and Y. Zhao, ‘Irreversible expansion of silica-gel beads
and quantification of pore structure made by silica-gel bead infiltration
method’, Powder Technology, 379(2021),
428–437.
J. Baloyo and
Y. Zhao, Permeability, ‘Form drag
coefficient and heat transfer coefficient of porous copper’, Heat
Transfer Engineering, 42(2021),
670–682.
C. Liang and
Y. Zhao, ‘Experimental
and analytical study on homogeneous and layered Al matrix syntactic foams under
impact’, International Journal of Impact Engineering, 153(2021) 103861.
P. Zhu and Y.
Zhao, ‘A limiting current sensor
based on porous Ni electrode for ferricyanide and ferrocyanide detection in aqueous solutions’, Electrochimica Acta, 385(2021), 138428
E.
Avalos-Gauna, Y. Zhao, L. Palafox and P. Ortiz-Monasterio-Martinez,
‘Porous metal properties
analysis: A machine learning approach’, JOM, 73(2021), 2039–2049.
2020
X. Lu, Y. Zhao
and D.J.C. Dennis, ‘Fluid flow
characterisation in randomly packed microscale porous beds with different
sphere sizes using micro-particle image velocimetry’, Experimental
Thermal and Fluid Science, 118(2020)
110136.
2019
P. Zhu, Z. Wu
and Y. Zhao, ‘Hierarchical
porous Cu with high surface area and fluid permeability’, Scripta Materialia, 172(2019) 119–124.
J. Yi, Y. Jia,
Y. Zhao, Z. Xiao, K. He, Q. Wang, M. Wang and Z. Li, ‘Precipitation behavior
of Cu-3.0Ni-0.72Si alloy’, Acta Materialia, 166(2019)
261-270.
K. Diao and Y.
Zhao, ‘Heat transfer
performance of sintered Cu microchannels produced by
a novel method’, International Journal of Heat and Mass Transfer, 139(2019) 537–547.
X. Lu and Y.
Zhao, ‘Effect of flow regime
on convective heat transfer in porous copper manufactured by lost carbonate
sintering’, International Journal of Heat and Fluid Flow, 80(2019) 108482.
Y. Zhang and
Y. Zhao, ‘Hysteretic
energy dissipation in aluminium matrix syntactic foam under intermittent cyclic
compression’, Materialia, 6(2019) 100286
P. Zhu and Y.
Zhao, ‘Cyclic voltammetry
measurements of electroactive surface area of porous nickel: Peak current and
peak charge methods and diffusion layer effect’, Materials Chemistry
and Physics 233(2019) 60–67.
H. Li, B.
Yuan, Y. Gao and Y. Zhao, ‘Effect of oligocrystallinity
on damping and pseudoelasticity of oligocrystalline Cu-Al-Mn shape
memory foams’, Journal of Alloys and Compounds, 773(2019) 940-949.
2018
X. Lu, Y. Zhao
and David J.C. Dennis, ‘Flow
measurements in microporous media using micro-particle image velocimetry’,
Physical Review Fluids, 3(2018),
104202.
K. Diao, X.
Lu, Z. Wu and Y. Zhao, ‘Heat
transfer performance of LCS porous copper with different structural
characteristics’, Materials Science Forum, 933(2018), 380-387.
C. Liang and
Y. Zhao, ‘Quasi-static and
impact response of graded aluminium matrix syntactic foams’,
Materials Science Forum, 933(2018),
246-255.
2017
P. Zhu and
Y.Y. Zhao, ‘Effects
of electrochemical reaction and surface morphology on electroactive surface area
of porous copper manufactured by Lost Carbonate Sintering’, RSC
Advances, 7(2017),
26392–26400.
L. P. Zhang
and Y. Y. Zhao, ‘Particle size
distribution of tin powder produced by centrifugal atomisation using rotating
cups’, Powder Technology, 318(2017),
62–67.
E. Avalos and
Y.Y. Zhao, ‘Numerical
simulation of heat transfer in porous metals for cooling applications’,
Metallurgical and Materials Transactions B, 48(2017), 1925-1932.
Y. Zhang, Z.
Xiao, Y.Y. Zhao, Z. Li, Y. Xing and K. Zhou, ‘Effect of thermo-mechanical treatments on
corrosion behavior of Cu-15Ni-8Sn Alloy in 3.5 wt% NaCl solution’,
Materials Chemistry and Physics, 199(2017),
54-66.
P. Zhu and
Y.Y. Zhao, ‘Mass transfer
coefficient of porous nickel manufactured by Lost Carbonate Sintering process’,
Advanced Engineering Materials, 19(2017),
1700392.
K. Diao, L.
Zhang and Y.Y. Zhao, ‘Measurement
of tortuosity of porous Cu using a diffusion diaphragm cell’,
Measurement, Measurement, 110(2017)
335–338.
2016
L. Shen, Z.
Li, Y.Y. Zhao, Y. Wang, Q. Dong and M. Wang, ‘Phase transformation behavior
of Cu-10Ni-3Al-0.8Si alloy’, Materials Chemistry and Physics, 173(2016), 421-428.
E. Avalos and
Y.Y. Zhao, ‘Numerical
simulation of heat transfer in porous metals for cooling applications’,
8th International Conference on Physical and Numerical Simulation of Materials
Processing, ICPNS’16, Seattle, Washington, USA, October 14-17, 2016.
2015
K.K. Diao, Z.
Xiao and Y.Y. Zhao, ‘Specific
surface areas of porous Cu manufactured by lost carbonate sintering:
measurements by quantitative stereology and cyclic voltammetry’,
Materials Chemistry and Physics, 162(2015),
571-579.
M. Tiryakioğlu, J.S. Robinson, M.A. Salazar-Guapuriche, Y.Y. Zhao and P.D. Eason, ‘Hardness-strength relationships in the aluminum alloy 7010’, Materials Science and
Engineering A, 631(2015),
196–200.
J.M. Baloyo
and Y.Y. Zhao, ‘Heat
transfer performance of micro-porous copper foams with homogeneous and hybrid
structures manufactured by lost carbonate sintering’, MRS
Proceedings, 1779(2015), mrss15-2095240.
doi:10.1557/opl.2015.699.
X. Xue and Y.
Zhao, ‘Chapter 7: Titanium matrix syntactic foams’, in: Metal
Matrix Syntactic Foams – processing, microstructure, properties and
applications, ed. by N. Gupta and P. K. Rohatgi, DEStech Publications, Inc., Lancaster, PA 17602 USA, 2015,
pp. 159-199.
2014
M. Altenaiji, Z. Guan, W. Cantwell, Y. Zhao and G. Schleyer,
‘Characterisation of
aluminium matrix syntactic foams under drop weight impact’, Materials
and Design, 59(2014), 296–302.
Z. Xiao and
Y.Y. Zhao, ‘Thermal
properties of porous copper manufactured by lost carbonate sintering’,
Materials Science Forum, 783-786(2014)
1603-1608.
Y. Shen, Y.
Li, W. Cantwell and Y. Zhao, ‘The fracture properties of sandwich
structures based on a metal foam core’, Advanced Materials Research, 936(2014), 2054-2062.
M. Altenaiji, G. Zhongwei, W. Cantwell and Y.Y. Zhao, ‘Characterisation of aluminium matrix
syntactic foams dynamic loading’, Applied Mechanics and Materials, 564(2014), 449-454.
2013
I. Chang and
Y. Zhao (editors), Advances in Powder Metallurgy: Properties, Processing and
Applications, Woodhead Publishing Ltd, Cambridge, UK, 2013. ISBN:
9780857094209.
Z. Xiao and
Y.Y. Zhao, ‘Heat transfer
coefficient of porous copper with homogeneous and hybrid structures in active
cooling’, Journal of Materials Research, 28(2013), 2545-2553.
Z. Xiao, Z.
Li, A. Zhu, Y. Zhao and Y. Zhu, ‘Surface characterization and
corrosion behavior of a novel imitation-gold copper
alloy with high tarnish resistance property in salt spray environment’,
Corrosion Science, 76(2013), 42-51.
Y. Zhao,
‘Porous metallic materials
produced by P/M methods’, editorial, Journal of Powder Metallurgy
& Mining, 2(2013), e113.
S. Al Otaibi
and Y. Zhao, ’Bending tests
of porous steel manufactured by LCS’, Proceedings of The 21st Annual
International Conference on Composites/Nano Engineering (ICCE - 21), Tenerife,
Spain, July 21-27, 2013, (ed. D Hui), pp. 27-28.
X. Lu and Y.
Zhao, ‘Brazilian test of
aluminium matrix syntactic foams’, Proceedings of The
21st Annual International Conference on Composites/Nano Engineering (ICCE -
21), Tenerife, Spain, July 21-27, 2013, (ed. D Hui), pp. 487-488.
2012
B. Zhang, T.
Chen, Y. Zhao, W. Zhang and J. Zhu, ‘Numerical and analytical solutions
for sound propagation and absorption in porous media at high sound pressure
levels’, Journal of the Acoustical Society of America, 132(2012), 1436–1449.
X.F. Tao and
Y.Y. Zhao, ‘Compressive failure
of Al matrix syntactic foams manufactured by melt infiltration’,
Materials Science and Engineering A, 549(2012),
228-232.
M. Altenaiji, G.K. Schleyer and Y.Y. Zhao, ‘Chapter 19
Characterisation of Aluminium Matrix Syntactic Foams Under
Static and Dynamic Loading’, In: Composites and Their Properties, ed. by
N. Hu, InTech, 2012, pp. 437-456.
2011
S. Gong, Z. Li
and Y.Y. Zhao, ‘An extended
Mori–Tanaka model for the elastic moduli of porous materials of finite
size’, Acta Materialia,
59(2011), 6820-6830.
M. Altenaiji, G.K. Schleyer, Y.Y. Zhao, ‘Characterisation of aluminium matrix
syntactic foams under static and dynamic loading’, Applied Mechanics
and Materials, 82(2011), 142-147.
Y. Zhao,
‘Metal matrix syntactic
foams: manufacture, matrix
material, microstructure, modulus and more’, JoM,
63(2011), 35.
X. Xue and Y.
Zhao, ‘Ti matrix syntactic foam
fabricated by powder metallurgy: particle breakage and elastic modulus’,
JoM, 63(2011),
43-47.
S. Gong, Z.
Li, G.Y. Xu, N. Liu, Y.Y. Zhao and S.Q. Liang, ‘Fabrication, microstructure and property
of cellular CuAlMn shape memory alloys produced by
sintering–evaporation process’, Journal of Alloys and
Compounds, 509(2011), 2924-2928.
2010
X.B. Xue, Y.Y.
Zhao, V. Kearns and R.L. Williams, ‘Mechanical and biological
properties of titanium syntactic foams’, Supplemental Proceedings of
TMS 2010 Annual Meeting & Exhibition, February 14-18, 2010, Seattle,
Washington, USA, Vol. 2: Materials Characterization, Computation, Modeling and Energy, The Minerals, Metals & Materials
Society (TMS), Warrendale, Pennsylvania, USA, 2010,
pp. 129-135.
M. Lu and Y.
Zhao, ‘Mechanical properties
of LCS porous steel: Comparison between the dissolution and decomposition
routes’, Supplemental Proceedings of TMS 2010 Annual Meeting &
Exhibition, February 14-18, 2010, Seattle, Washington, USA, Vol. 2: Materials
Characterization, Computation, Modeling and Energy,
The Minerals, Metals & Materials Society (TMS), Warrendale,
Pennsylvania, USA, 2010, pp. 137-142.
2009
X.F. Tao and
Y.Y. Zhao, ‘Compressive behavior of Al matrix syntactic foams toughened with Al
particles’, Scripta Materialia,
61(2009), 461-464.
J. Chen, Z. Li
and Y.Y. Zhao, ‘A High working
temperature CuAlMnZr shape memory alloy’,
Journal of Alloys and Compounds, 480(2009),
481-484.
X. F. Tao, G.
K. Schleyer and Y. Y. Zhao, ‘Indentation tests on Al matrix
syntactic foams’, in: H. Zhao and N. A. Fleck (eds.), Proc. IUTAM
Symposium on Mechanical Properties of Cellular Materials, IUTAM Bookseries, 12(2009), 97-104.
M. Lu, Y.Y.
Zhao, G. Seiffert and C. Hopkins, ‘Acoustic
absorption characteristics of an porous steel’,
Materials Research Society Symposium Proceedings, 1188(2009), 207-212.
L.P. Zhang,
Y.Y. Zhao, D. Mullen and K. Lynn, ‘Heat
transfer performance of porous copper fabricated by lost carbonate sintering
process’, Materials Research Society Symposium Proceedings, 1188(2009), 213-218.
Z. Li, Z. Y.
Pan, Y.Y Zhao, Z. Xiao, M.P.Wang, ‘Microstructure and properties of high
conductivity, super high strength Cu-8.0Ni-1.8Si-0.6Sn-0.15Mg alloy’,
Journal of Materials Research, 24(2009),
2123-2129.
X. F. Tao, L.
P. Zhang and Y. Y. Zhao, ‘Al
matrix syntactic foam fabricated with bimodal ceramic microspheres’,
Materials and Design, 30(2009),
2732-2736.
N. Tang, M.P.
Wang, H.F. Lou, Y.Y. Zhao and Z. Li, ‘Microstructure
and texture of twin-roll cast Mg–3Al–1Zn–0.2Mn magnesium
alloy’, Materials Chemistry and Physics, 116(2009), 11-15.
Z. Li, J.L.
Chen and Y.Y. Zhao, ‘Corrosion
characteristic of Ce Al brass in comparison with As Al brass’,
Materials and Design, 30(2009),
1743-1747.
Y.Y. Zhao and
X.F. Tao, ‘Behaviour of metal
matrix syntactic foams in compression’, in: Proceedings of Materials
Science and Technology (MS&T) 2009, October 26-29, 2009, Pittsburgh, Pennsylvania,
USA, The Printing House, Inc., Stoughton, WI 53589, 2009, 1785-1794.
2008
L. P. Zhang and Y. Y. Zhao, ‘Fabrication of high melting-point porous metals by lost carbonate Sintering Process via Decomposition Route’, Journal of Engineering Manufacture, 222(2008), 267-271.
D. J. Thewsey and Y. Y. Zhao, ‘Thermal conductivity of porous copper manufactured by the lost carbonate sintering process’, Physica Status Solidi A, 205(2008), 1126–1131.
Y. Zhao and L.
E. Monaghan, ‘A novel
manufacturing method for titanium foam for biomedical applications’,
in: Advances in Powder Metallurgy & Particulate Materials, Proc. 2008 World
Congress on Powder Metallurgy & Particulate Materials, June 8–12,
2008, Washington, D.C., US. Volume III: Part 9, MPIF, 2008, 340-348.
X. Tao, L.
Zhang and Y. Zhao, ‘Compressive
response of Al matrix syntactic foam manufactured by liquid sintering’,
Proceedings of Materials Science and Technology (MS&T) 2008 - Processing,
Properties, and Performance of Composite Materials, October 5-9, 2008,
Pittsburgh, Pennsylvania, USA, Printing House, Inc., pp. 2587-2594.
Y. Y. Zhao, X.
F. Tao and X. B. Xue，
‘Manufacture and mechanical
properties of metal matrix syntactic foams’， Proceedings
of Materials Science and Technology (MS&T) 2008 - Processing, Properties,
and Performance of Composite Materials, October 5-9, 2008, Pittsburgh,
Pennsylvania, USA, Printing House, Inc., pp. 2607-2615.
2007
L. P. Zhang and Y. Y. Zhao, ‘Mechanical response of Al matrix syntactic foams produced by pressure infiltration casting’, Journal of Composite Materials, 41(2007), 2105-2117.
X. F. Tao, L. P. Zhang and Y.Y. Zhao, ‘Mechanical response of porous copper manufactured by lost carbonate sintering process’, Materials Science Forum, 539-543(2007), 1863-1867.
2006
X. Ma, A. J. Peyton and Y. Y. Zhao, ‘Eddy current measurements of the electrical conductivity and magnetic permeability of porous metals’, NDT & E International, 39(2006), 562-568.
M. A. Salazar-Guapuriche, Y.Y. Zhao, A Pitman and A Greene, ‘Correlation of strength with hardness and electrical conductivity for aluminium alloy 7010’, Materials Science Forum, 519-521(2006), 853-858.
Y. Y. Zhao,
‘Considerations in designing a
centrifugal atomiser for metal powder production’, Materials &
Design, 27(2006), 745-750.
Q. Yao and Y.
Zhao, ‘Probabilistic analysis of
numbers of namesakes in a large population’, The Mathematical
Scientist, 31(2006), 69-72.
Y. Y. Zhao,
‘How to design and interpret a
multiple-choice-question test: A probabilistic approach’,
International Journal of Engineering Education, 22(2006), 1281-1286.
Y. Zhao,
‘Evaluation of a new scheme for
converting MCQ test scores to percentage marks’, Proceedings of the
International Conference on Innovation, Good Practice and Research in
Engineering Education 2006, 24-26 July 2006, Liverpool, UK, ed. by S. Doyle and
A. Mannis, The Higher Education Academy Subject Centres for Materials and
Engineering, 2006, pp62-67.
2005
Y. Y. Zhao, T. Fung, L.P. Zhang and F.L. Zhang, ‘Lost carbonate sintering process for manufacturing metal foams’, Scripta Materialia, 52(2005), 295-298.
D. X. Sun and Y. Y. Zhao, ‘Simulation of thermal diffusivity of Al/NaCl powder compacts in producing Al foams by the sintering and dissolution process’, Journal of Materials Processing Technology, 169(2005), 83-88.
X. Ma, A. J. Peyton and Y. Y. Zhao, ‘Measurement of the electrical conductivity of open-celled aluminium foam using non-contact eddy current techniques’, NDT & E International, 38(2005), 359-367.
D.X. Sun and
Y.Y. Zhao, ‘Phase changes in sintering
of Al/Mg/NaCl compacts for manufacturing Al foams by
the sintering and dissolution process’, Materials Letters, 59(2005),
6-10.
Y.Y. Zhao,
‘A simplified model for
velocity and temperature evolution of alloy droplets in centrifugal atomisation
and spray deposition’, Materials Science Forum, 475-479(2005) 4261-4265.
Y.Y. Zhao,
‘Algorithms for converting raw scores
of multiple choice question tests to conventional percentage marks’,
International Journal of Engineering Education, 21(2005), 1189-1194.
M.A. Salazar-Guapuriche, Y.Y. Zhao, A. Pitman and A. Greene, ‘Variations of properties across billet thickness
for Al alloy 7010’, Transactions of Nonferrous Metals Society of
China, 15(2005), 1258-1263.
2004
Y. Y. Zhao, ‘Analysis of flow development in centrifugal atomisation Part II: Disintegration of a non-fully spreading melt’, Modelling and Simulation in Materials Science and Engineering, 12(2004), 973-983.
Y. Y. Zhao, ‘Analysis of flow development in centrifugal atomization Part I: Film thickness of a fully spreading melt’, Modelling and Simulation in Materials Science and Engineering, 12(2004), 959-971.
J. W. Xie, Y. Y. Zhao and J. J. Dunkley, ‘Effects of processing conditions on powder particle size and morphology in centrifugal atomisation of tin’, Powder Metallurgy, 47(2004), 168-172.
K. H. Ho and Y. Y. Zhao, 'Modelling Flow Development on Rotating Disc in Centrifugal Atomisation', Materials Science and Engineering A, 365(2004), 336-340.
Y. Y. Zhao, F.
S. Han and T. Fung, 'Optimisation of
Compaction and Liquid-State Sintering in Sintering and Dissolution Process for
Manufacturing Al Foams', Materials Science and Engineering A, 364(2004),
118-126.
Y. Y. Zhao, F.
L. Zhang and L. P. Zhang, ‘Impact
response of aluminium and aluminium matrix syntactic foams’,
Proceedings of International Conference on Planning, Design and Construction of
Hardened and Protective Facilities - HARDFAC 2004, 14-16 April 2004, Kuala
Lumpur, Malaysia, ed. by Pace It Sdn Bhd, Science and Technology Research Institute for Defence,
Kuala Lumpur, Malaysia, 2004, pp173-182.
K.H. Ho and
Y.Y. Zhao, ‘Modelling skull formation on a rotating disc in centrifugal
atomisation’, Proceedings of the 3rd International Conference
"Computational Modeling and Simulation of
Materials", May 30 – June 4 2004, Acireale,
Sicily, Italy, Advances in Science and Technology, Techna
Group Srl, Faenza, Italy, Vol. 43, 2004, pp59-64.
Y. Y. Zhao,
‘Calculation of mean velocity of liquid flow in a nozzle’,
Proceedings of 5th International Conference on Mathematical Problems in
Engineering and Aerospace Sciences (ICNPAA 2004, 2-4 June 2004, Timisoara,
Romania), ed. by S. Sivasundaram, Cambridge
Scientific Publishers, Cambridge, UK, 2005, pp699-705.
Y. Y. Zhao,
‘Liquid flow and heat transfer in centrifugal atomisation’, Proceedings
of 5th International Conference on Mathematical Problems in Engineering and
Aerospace Sciences (ICNPAA 2004, 2-4 June 2004, Timisoara, Romania), ed. by S. Sivasundaram, Cambridge Scientific Publishers, Cambridge,
UK, 2005, pp707-714.
2003
F. Han, G. Seiffert, Y. Zhao and B. Gibbs, 'Acoustic Absorption Behaviour of an Open-Celled Aluminium Foam', Journal of Physics D: Applied Physics, 36(2003), 294-302.
Y. Y. Zhao, 'Stochastic Modelling of Removability of NaCl in Sintering and Dissolution Process to Produce Al Foams', Journal of Porous Materials, 10(2003), 105-111.
D. X. Sun and
Y. Y. Zhao, 'Static and Dynamic Energy
Absorption of Al Foams Produced by Sintering and Dissolution Process',
Metallurgical and Materials Transactions B, 34(2003), 69-74.
Y. Y. Zhao,
‘Sintering and dissolution
process: A novel method for manufacturing aluminium foams’, World
Science-Technology R&D (Bimonthly), 25(2003),
66-71.
2001
Y. Y. Zhao and
D. X. Sun, ‘A Novel
Sintering-Dissolution Process for Manufacturing Al Foams’, Scripta Materialia, 44(2001),
105-110.
D. X. Sun, T.
Fung and Y. Y. Zhao, ‘Quantification
of NaCl in Al foams manufactured by sintering and
dissolution process’, Cellular Metals and Metal Foaming Technology,
(Proc. 2nd Int. Conf. Cellular Metals and Metal Foaming Technology, MetFoam 2001, Fraunhofer
Institute for Manufacturing and Advanced Materials, 18-20 June 2001, Bremen,
Germany), ed. by J. Banhart, M.F. Ashby, N.A. Fleck, Verlag MIT Publishing, Bremen, Germany, 2001, pp227-230.
2000
Y. Y. Zhao, A.
L. Dowson, and M. H. Jacobs, ‘Modelling
liquid flow after a hydraulic jump on a rotating disk prior to centrifugal
atomization’, Modelling and Simulation in Materials Science and
Engineering, 8(2000), 55-65.
Y. Y. Zhao, P.
S. Grant and B. Cantor, ‘Modelling
and experimental analysis of vacuum plasma spraying, Part I: Prediction of
initial plasma properties at plasma gun exit’, Modelling and Simulation
in Materials Science and Engineering, 8(2000),
497-513.
Y. Y. Zhao, P.
S. Grant and B. Cantor, ‘Modelling
and experimental analysis of vacuum plasma spraying, Part II: Prediction of
temperatures and velocities of plasma gases and Ti particles in a plasma jet’,
Modelling and Simulation in Materials Science and Engineering, 8(2000), 515-540.
Y. Y. Zhao, ‘Modelling deposit growth on tilted
rotating cylindrical substrate in centrifugal spray deposition’,
Powder Metallurgy, 43(2000),
117-122.
Y. Y. Zhao,
Droplet cooling in metal powder production by centrifugal atomisation,
Proceedings of 2000 Powder Metallurgy World Congress (PM 2000 Kyoto), Nov.
12-16, 2000, Kyoto, Japan, ed by K. Kosuge & H. Nagai, Japan Society of Powder and Powder
Metallurgy, Tokyo, Japan, 2000, pp. 355-358.
1998
Y. Y. Zhao, M.
H. Jacobs and A. L. Dowson, ‘Liquid flow on a rotating disk prior
to centrifugal atomization and spray deposition’, Metallurgical and
Materials Transactions B, 29(1998),
1357-1369.
Y. Y. Zhao, A.
L. Dowson, R. M. Ward and M. H. Jacobs, ‘Physical simulation and computer
modelling of centrifugal atomization of liquid metals’, Proceedings of
the 1998 Powder Metallurgy World Congress and Exhibition, 18-22 October 1998,
Granada, Spain, European Powder Metallurgy Association, Vol. 1, pp. 8-13.
Y. Y. Zhao, A.
L. Dowson and M. H. Jacobs, ‘Modelling of liquid flow after a hydraulic
jump on a rotating disk in centrifugal atomization’, Proceedings of the
14th International Conference on Liquid Atomization and Spray Systems, ed. by
A. J. Yule, 6-8 July 1998, Manchester, UK, UMIST, 1998, pp. 376-381.
Y. Y. Zhao,
‘Mathematical modelling of liquid flow in materials processing’,
Materials Science and Industrial Technology, Proceedings of 3rd Chinese Young
Scientists Conference, Chinese Association of Science and Technology, 20-22
August 1998, Beijing, China, ed. by LI Jianbao, Chinese
Science and Technology Publishing Co., August 1998, pp. 17-20.
Y. Y. Zhao,
‘Centrifugal spray deposition of liquid metals’, Chinese Journal of
Materials Research, 12(1998),
Supplement, 38-44.
1997
A. L. Dowson,
M. H. Jacobs, J. M. Young, Y. Y. Zhao, B. Parsons, D. Weale and M. Bird,
‘Centrifugal spray deposition of high performance materials: recent
results and future developments’, Total Technology for Advanced
Materials, (Proc. of The Third International Conference on Spray Forming, 9-11
September 1996, Cardiff, UK) Osprey Metals Ltd., 1997, pp. 193-202.
Y. Y. Zhao, R.
M. Ward, T. P. Johnson, A. L. Dowson, J. M. Young and M. H. Jacobs,
‘Numerical modelling of electromagnetic stirring of liquid pool in plasma
arc melting’, Proceedings of the International Congress on
Electromagnetic Processing of Materials, 26-29 May 1997, Paris la Defense, France, Centre Français
de l’Electricité, 1997, Vol. 2, pp.
497-503.
Y. Y. Zhao, Y.
Dutterail, M. H. Jacobs and M. Garnier,
‘Numerical modelling of transverse induction heating of aluminium
sheet’, Proceedings of the International Congress on Electromagnetic
Processing of Materials, 26-29 May 1997, Paris la Defense,
France, Centre Français de l’Electricité,
1997, Vol. 2, pp. 511-516.
1996
A. L. Dowson,
M. A. Duggan, Y. Y. Zhao, M. H. Jacobs and J. M. Young, ‘Microstructure
and thermomechanical processing response of spray formed Ti alloys produced by
centrifugal spray deposition’, Advances in Powder Metallurgy &
Particulate Materials - 1996, Vol. 3, Part 9, pp. 67-78, Compiled by T. M. Cadle & K. S. Narasimhan,
Metal Powder Industries Federation, Princeton, New Jercy,
USA, 1996, The 1996 World Congress on Powder Metallurgy & Particulate
Materials, 16-21 June 1996, Washington, D.C., USA
Y. Y. Zhao, A.
L. Dowson, T. P. Johnson, J. M. Young and M. H. Jacobs, ‘Prediction of
liquid metal velocities on a rotating disk in spray forming by centrifugal
spray deposition’, Advances in Powder Metallurgy & Particulate
Materials - 1996, Vol. 3, Part 9, pp. 79-89, Compiled by T. M. Cadle & K. S. Narasimhan,
Metal Powder Industries Federation, Princeton, New Jercy,
USA, 1996, (Proc. of The 1996 World Congress on Powder Metallurgy &
Particulate Materials, 16-21 June 1996, Washington, D.C., USA)
Y. Y. Zhao,
‘Effect of vacuum plasma spraying conditions on powder melting’,
Materials Review, 10(1996),
Supplement, 155-162.
1995
P. S. Grant,
R. Hambleton, Y. Y. Zhao, K. A. Q. O’Reilly and B. Cantor, ‘Process
microstructure relationships in vacuum plasma sprayed coatings’, Surface Modification
Technologies VIII, ed. by T. S. Sudarshan & M. Jeadin, The Institute of Materials, London, UK, 1995, pp.
783-788.
1994
Y. Y. Zhao, P.
S. Grant and B. Cantor, ‘The mechanical behaviour of SiC
fibres in a Ti matrix during fabrication by vacuum plasma spraying and vacuum
hot pressing’, Recent Advances in Titanium Metal Matrix Composites, ed.
by F. H. Froes & J. Storer, TMS, Pennsylvania,
1995, pp. 55-62.
P. S. Grant,
Y. Y. Zhao, J. H. Li, M. L. Jenkins and B. Cantor, ‘Spray processing of
Ti metal matrix composites’, Science and Technology of Rapid
Solidification and Processing Technologies, ed. by M. A. Otooni,
Book Series: Nato Advanced Science Institutes Series,
Series E, Applied Sciences, Volume: 278, Kluwer Academic Publishers, Dordrecht,
Netherlands, 1995, pp. 109-121.
Z. X. Guo, J.
H. Li and Y. Y. Zhao, ‘Review of long-fibre reinforced Ti-based
composites’, Materials Review, No. 81, 1994, Supplement, 62-71.
1993
Y. Y. Zhao, P.
S. Grant and B. Cantor, ‘Fabrication of Ti/SiCf metal matrix composites by vacuum plasma
spraying’, Journal de Physique IV, 3(1993),
1685-1691.
1992
Y. Y. Zhao, P.
S. Grant and B. Cantor, ‘The microstructure of spray-formed Ti-6Al-4V/SiCf metal-matrix composites’, Journal of Microscopy,
169(1992), 263-267.
1991
Z. L. Zhang,
T. F. Liu and Y. Y. Zhao, ‘Optimisation of plasma carburising process -
hydrogen ion bombardment diffusion substituting for vacuum diffusion’,
Proceedings of the 5th Chinese Annual Conference on Heat Treatment, Nanjing,
1991, ed. by The Heat Treatment Association of the Chinese Mechanical Society,
Tianjin University Press, 1991.
1990
Y. Y. Zhao, Z.
L. Zhang and S. Y. Chen, ‘Study on kinetics of carbon supply in plasma
carburising’, Transactions of Metal Heat Treatment, 11(1990), 74-80.
1989
Y. Y. Zhao and
Z. L. Zhang, ‘Mathematical model and computer simulation of plasma
carburising’, Proceedings of the National Conference on Computer
Applications in Heat Treatment, Nov. 15-18, 1989, Luoyang, China, p. 65.
1988
Y. Y. Zhao, Z.
L. Zhang, S. Y. Chen and D. Y. Wang, ‘Mathematical model for carbon
supply rate in plasma carburising’, Plasma Surface Engineering,
Proceedings of the 1st International Conference on Plasma Surface Engineering,
Sept. 19-23, 1988, Garmisch-Partenkirchen, FRG, ed. by E. Broszeit,
W. D. Munz, H. Oechsner, K.
-T. Rie & G. K. Wolf, DGM Informationsgesellschaft-Verlag,
1988, Vol. 1, pp. 53-60.
Y. Y. Zhao, Z.
L. Zhang, S. Y. Chen and D. Y. Wang, ‘Mechanism and kinetic model of
carbon supply in plasma carburising’, Heat Treatment and Surface Engineering
- New technology and Practical Applications, Proceedings of the 6th
International Congress on Heat Treatment of Materials, Chicago, USA, 28-30
Sept. 1988, ed. by G. Krauss, ASM International, 1988, pp. 89-92.
1987
Y. Y. Zhao,
‘Present situation and prospects on plasma carburising’,
Proceedings of the First Chinese Youth Symposium on Materials Science, Oct.
16-19, 1987, Shengyang, China, Vol. 2, p. 67.
For further information please contact:
Professor Yuyuan Zhao
School of Engineering
The University of Liverpool
Brownlow Hill
Liverpool L69 3BX
U. K.
|
Phone: |
+44 (0)151 794 4697 |
|
Fax: |
+44 (0)151 794 4675 |
|
E-mail: |
File last modified: 28 January 2022